• Home
  • Momentum Watch M50 Mark II Black-Ion 44MM Hyper Rubber

Momentum Watch M50 Mark II Black-Ion 44MM Hyper Rubber

SKU: 7687
$499.00 (incl. gst)
or 4 payments of $124.75 with Info

Momentum Watch M50 Mark II Black ION Dial with Black Hyper Rubber Strap

The Momentum M50 Watch Family includes the M50 black-ion Mark II watch which was inspired by military and tactical teams. The M50 Mark 2 Watch is the ultimate scratch resistant, bulletproof, professional dive watch. The rugged features make this watch nearly indestructible and is worn by the Vancouver ERT, Maryland State Police and many other tactical units across North America. 

The legendary Momentum M50 Mark II 44mm Watch offers industry leading reliability, durability and outstanding performance, with a 500M rating, scratch-proof sapphire crystal and 10 year battery life. The MARK II is the latest addition to the M50 Sports Watch Family: it adds a bold sports dial, with large, luminous numbers for unmatched readability.

Scratch-Resistant Sapphire Crystal

What is Sapphire Glass?

Synthetic sapphire combined of crystallised aluminium oxide

Astonishingly Sturdy
Value of 9 Mohs of mineral hardness same as titanium carbide

Scratch Resistant 
Superior to Quartz or gorilla glass

  • Watch Glass
  • Display 
  • Optics

Synthetic Sapphire: 
A synthetic sapphire crystal or “glass” is actually not glass at all. It is a very hard, transparent material made of crystallising pure aluminium oxide at very high temperatures. Synthetic sapphire has the same hardness as natural sapphire gemstones, but without the colouring agents that give the gems their various hues. When it is heated, the synthetic sapphire forms round masses, that are then sliced into pieces with diamond-coated saws. These disks are then ground and polished into watch crystals. (One reason sapphire crystals are relatively expensive is that the tools required to cut and polish this extremely hard material are very costly.) Sapphire (whether natural or synthetic) is one of the hardest substances on earth. It measures 9 on the Mohs scale, which is a system for rating the relative hardness of various materials. (Diamond measures 10, the highest rating.) Watch crystals made of synthetic sapphire are often marketed as “scratch resistant” or “virtually scratchproof” because they are very difficult - but not impossible - to scratch. Diamond can scratch them; so can man-made materials that incorporate silicon carbide, which, with a Mohs rating of between 9 and 10, is harder than sapphire. So, if you accidentally scratch your watch on a simulated-stone surface or a wall that incorporates some of these silicon carbide materials, it could scratch the crystal.

AR Coatings:
Sapphire crystal is more reflective than mineral crystal due to its higher index of refraction. (1,8 compared to 1,47). Applying one or more layers of AR (anti-reflective) coating will limit this reflection to a very low level. Very often, lines and marks on the top surface of a sapphire crystal are mistaken for scratches but are actually the scratched AR coating, or just AR coating wearing off after time. An AR coating on the inside of the crystal provides a good AR performance while avoiding this problem. If you do scratch a sapphire crystal, then it cannot be polished away and will need to be replaced.
Waterproof gasket:
As both mineral and sapphire crystals are extremely hard, they have little or no “flex”. This means that when the crystal is inserted into a hard, steel or titanium watch case, it requires a gasket to ensure a waterproof seal.  These crystal gaskets are typically made of nylon, and are either flat, “I”-shaped or “L”-shaped. (see example above). The crystal is pressed into the case, using a crystal press tool. When it is pressed in, the nylon crystal gasket is “squeezed” between the crystal and the case rim, making a reliable waterproof seal. Over time, these crystal gaskets can become brittle and break, so it is a good idea to change the crystal gaskets every few years, to ensure the ongoing waterproof performance of your watch.
  • Band Material: Black Hyper Rubber
  • Watch Size: 44mm
  • Watch Thickness: 15mm
  • Band Width: 22mm
  • Movement: Japanese, Miyota 2S60
  • Glass: Sapphire
  • Water Resistance: 500m/16450ft 
  • Battery: CR2012
  • Technology : Quartz Analogue with long life battery system
  • Functions: HH, MM, SS, DATE
  • Power: Lithium Cell 
  • Case: Solid 316L Stainless Steel
  • Crystal: Flat, Scratch resistant Sapphire Glass with magnifier for date
  • Finish: Matte Stainless Steel
  • Water-Resistance: 500M / 1650FT
  • Dial Colour: Black
  • Manufacturer Number: 1M-DV54B1B
  • Country of Origin: Canada
Other Information

Ratings & Reviews

No reviews available

Be the first to Write a Review