MIRA Safety Gas Mask Replacement Parts Deluxe Kit
New
Description
Keep your gas mask in peak condition with the MIRA Safety Gas Mask Replacement Parts Kit. Whether it’s a matter of wear and tear or just passing long years in storage, your gas mask has several parts that absolutely must be replaced at specific intervals in order to maximise the protection your respirator offers—and minimise the risk of unexpected exposure. In most cases, wear parts should be replaced at least every 5 years for masks in storage and more frequently for masks in active use.
The Deluxe Gas Mask Replacement Parts Kit includes all Essentials and the compatible CM-6M Head Harness:
This kit is compatible with the CM-6M (all variants), CM-7M, CM-8M, and the TAPR. Please note, for the CM-7M, CM-8M, and TAPR, inner mask valves will not be necessary.
Included in this Kit are:
IMPORTANT NOTES: These replacement parts are NOT compatible with smaller gas masks for children.
IMPORTANT SAFETY WARNING: Although installation is straightforward, it is recommended having these parts installed by a professional respirator service centre to ensure the mask seals properly after service. Professional respirator service centres use a negative pressure fit tester to ensure that there are no leaks after new parts are installed. If you choose to install these values yourself, make sure to conduct a negative pressure test to ensure the mask is properly sealing.
MIRA Safety, Survival Supplies Australia, and all affiliates are not responsible for incorrect assembly, improper maintenance, or modifications of masks.Specifications
Included in Kit:
MIRA Safety Gas Mask Replacement Parts Deluxe Kit with CM-6M Head Harness
Keep your gas mask in peak condition with the MIRA Safety Gas Mask Replacement Parts Kit. Whether it’s a matter of wear and tear or just passing long years in storage, your gas mask has several parts that absolutely must be replaced at specific intervals in order to maximise the protection your respirator offers—and minimise the risk of unexpected exposure. In most cases, wear parts should be replaced at least every 5 years for masks in storage and more frequently for masks in active use.
The Deluxe Gas Mask Replacement Parts Kit includes all Essentials and the compatible CM-6M Head Harness:
This kit is compatible with the CM-6M (all variants), CM-7M, CM-8M, and the TAPR. Please note, for the CM-7M, CM-8M, and TAPR, inner mask valves will not be necessary.
Included in this Kit are:
- 4 x Inner Mask Valves - MIRA Safety Gas Masks come with an oro-nasal cup (also called an inner mask) to prevent fogging and help redirect the flow of CO2. These inner valves are meant to be installed on the oro-nasal cup itself, along with the inhalation ports to prevent the backflow of filtered air back through the filter.
- 1 x Exhalation Valve - This is one of the most critical components for ensuring your mask seals properly and performs reliably. The exhalation valve expands as you breathe out, then immediately snaps shut to protect you from dangerous environments. Your mask MUST have a functioning Exhalation Valve to work properly.
- 1 x Exhalation Valve Cover - This cover protects the exhalation valve. While it sits snugly over the exhalation port and is made of robust materials, it should be replaced if you see any signs of damage or if it is misplaced.
- 1 x 40mm Plug - Most MIRA Safety gas masks have two ports for gas mask filters. By plugging one port, you can use a single filter for a lighter setup that’s easier to wear while shouldering a rifle or moving around.
- 1 x CM-6M Head Harness - The head harness should be replaced every 10 years, or if you begin to notice that the elastic is stretched out, damaged, etc.
IMPORTANT NOTES: These replacement parts are NOT compatible with smaller gas masks for children.
IMPORTANT SAFETY WARNING: Although installation is straightforward, it is recommended having these parts installed by a professional respirator service centre to ensure the mask seals properly after service. Professional respirator service centres use a negative pressure fit tester to ensure that there are no leaks after new parts are installed. If you choose to install these values yourself, make sure to conduct a negative pressure test to ensure the mask is properly sealing.
MIRA Safety, Survival Supplies Australia, and all affiliates are not responsible for incorrect assembly, improper maintenance, or modifications of masks.
- Compatible with the CM-6M (all variants), CM-7M, CM-8M, and TAPR
- Includes Inner mask valve, exhalation valve, valve cover and 40mm plug and CM-6M head harness
- Valve parts last up to 5 years from normal use
- Manufacturer Number: PARTS-KIT-2
Included in Kit:
- 4 x Inner Mask Valves
- 1 x Exhalation Valve
- 1 x Exhalation Valve Cover
- 1 x 40mm Plug
- 1 x CM-6M Head Harness
Ratings & Reviews
No reviews available
Be the first to Write a Review